Loker Batam PT. Cladtek Bi Metal Manufacturing (4 Posisi)

Lowongan Kerja Batam Cladtek Bi Metal Manufacturing

LOKER BATAM HARI INI 7 MEI 2025 - PT. Cladtek Bi Metal Manufacturing adalah perusahaan asing asal Australia sebagai produsen terbesar dunia dalam industri Welded Pipe, Bi-Metal pipa dan masih banyak lagi lainnya.

PT. Cladtek Bi Metal Manufacturing BUTUH SEGERA:

Posisi:
1. NDE Technician (PAUT)
2. NDE Technician (DRT/RT)
3. NDE Technician (UT PCN/ISO 9712)
4. NDE Cross Checker

Sejarah Berdiri PT. Cladtek Bi-Metal Manufacturing
Cladtek Bi-Metal Manufacturing mengawali operasinya di Batam pada tanggal 12 April 2007 yang ketika masih berlokasi di Jalan Bawal Kavling V, Batu Merah. Dan dengan semakin berkembangnya bisnis perusahaan, maka tanggal 05 Oktober 2010 Cladtek berpindah tempat dengan alamat Jalan Tenggiri No 1 dan bertahan hingga sampai saat ini.

Profil PT. Cladtek Bi-Metal Manufacturing
PT. Cladtek Bi-Metal Manufacturing bergerak dibidang manufacturing industri untuk beberapa pekerjaan mengenai material logam, khususnya proses Weld Overlaydan Lining pada pipa baja karbon untuk keperluan industri. Cladtek Batam dikenal sebagai pemasok kuota produksi pipa cladding terbesar di Indonesia dan juga dunia.

Didukung dengan fasilitas yang memadai Cladtek Batam dapat melayani permintaan pasar diseluruh dunia tanpa mengurangi kualitas produknya dan harganya yang relatif bersaing.

Untuk mendukung layanan pasar dunia, maka Cladtek membentuk Cladtek International yang mana bertugas sebagai pemasar dan penjual produk. Sementara kantor pusat Cladtek berada di Perth, Australia Barat.

Key Responsibilities (posisi 1):
  • Ensure a full understanding of all applicable PAUT procedures for each project in regard to inspection & reporting.
  • Monitor valid calibration of PAUT equipment.
  • Calibration phased array ultrasonic equipment before starting the inspection.
  • Record for calibration activity such as time base linearity, and vertical linearity as per procedure requirement.
  • Conduct the inspection activity as per request.
  • Mark the status of material (a pipe, etc.) After the inspection is done, the clear marking shall be working on each material and the exact location if any repair is found during the inspection.
  • Prepare the worksheet as a rough report before transferring it to a formal report by document control.
  • Review and Signed the report after the formal report created by document control.

Qualifications (posisi 1):
  • Minimum education is Senior High School.
  • Qualifed PAUT Level 2 with ISO 9712 (PCN/CSWIP) Certification
  • Minimum 3 year's experience as NDE PAUT.
  • Familiar with Hydroform probe will be an advantage.
  • Able to reading a Jaeger Number 1 (J1).

Behavior Requirements (posisi 1):
  • Team player with good communication and listening skills.
  • Quick learner, good analytical skill, and good problem solving ability.
  • Quick to adapt to new environments and people of varied backgrounds and cultures. Willing to be placed in Batam.

Key Responsibilities (posisi 2):
  • Ensure a full understanding of all applicable RT procedures for each project in regard to inspection & reporting.
  • Check the Film expiration date before use.
  • Check RT equipment before use.
  • Process Film after exposure for Interpretation by RTFI.
  • Mark up the detail RT location on the material (a pipe, liner, butt weld, etc.).
  • Check and monitor safety radiation.
  • Responsible for the care and maintenance of RT equipment.
  • Monitor the supplier (NDE Company) to do RT activities.
  • Review and sign the RT report.

Qualifications (posisi 2):
  • The minimum education is senior high school.
  • Qualified and Certified at least NDE OR/AR from BAPETEN.
  • Certified MT/PT/UT ISO 9721.
  • Capable to reading a Jaeger Number 1 (J1).
  • Certified Operator Radiography (OR) or Ahli Radiography (AR) from BAPETEN.

Behavior Requirements (posisi 2):
  • Team player with good communication and listening skills.
  • Quick learner, good analytical skill, and good problem solving ability.
  • Quick to adapt to new environments and people of varied backgrounds and cultures. Willing to be placed in Batam.

Key Responsibilities (posisi 3):
  • Ensure a complete understanding of all applicable MT/PT/UT procedures for each project regarding inspection and reporting.
  • Monitor the valid calibration of MT/PT/UT equipment.
  • Calibrate ultrasonic equipment before starting the inspection.
  • Record calibration activities such as time baseline linearity and vertical linearity as per procedure requirements.
  • Conduct the MT/PT/UT inspection activity as requested.
  • Mark the status of materials (pipes, fittings, flanges, etc.) after the inspection is completed.
  • Clear markings should be placed on each material, indicating the exact location if any repairs are found during the inspection.
  • Prepare a worksheet as a preliminary report before transferring it to a formal report through document control.
  • Review and sign the report after the formal report is created by document control.

Qualifications (posisi 3):
  • The minimum education is senior high school.
  • Have a minimum of 3 year's experience as NDE Technician.
  • Qualified in PCN/ISO/CSWIP UT Level 2.
  • Qualified in PCN/ISO/CSWIP MT/PT Level 2.

Behavior Requirements (posisi 3):
  • Team player with good communication and listening skills.
  • Quick learner with strong analytical skills and effective problem-solving abilities.
  • Strong attention to detail to accurately perform inspections, detect defects, and record findings.
  • Ability to quickly adapt to new environments and work with people from varied backgrounds and cultures.
  • Demonstrate a willingness to learn and stay updated on new techniques, technologies, and industry standards.
  • Willingness to be placed in Batam.

Key Responsibilities (posisi 4):
  • Ensuring day-to-day NDE activities performed by the NDE technician are fully complied with the approved NDE Procedure, SOP, or project specification.
  • Providing briefing/orientation to NDE personnel regarding the requirements of the work order related to their position/assignment.
  • Ensure a full understanding of all applicable NDE procedures for each project in regard to inspection and reporting.
  • Monitor the valid calibration of NDE equipment.
  • Calibration of NDE equipment before starting the inspection.
  • Highlighting any non-conformance of the NDE process to the approved methodology and procedures and issuing an NCR.
  • Coordinate with the NDE superintendent for any non-compliance in the NDE process.
  • Promote the BIQ implementation within the Shop floor.
  • Wear all PPE as directed.

Qualifications (posisi 4):
  • Minimum Bachelor's Degree / Diploma 3 in Engineering or another QA/NDE-related major, or a Minimum of 5 years' experience in NDE or a similar function.
  • Qualified and certified as NDE Level II (according to SNT-TC-1A and ISO 9712) in a minimum of 4 methods (MT/PT/UT/RT/PAUT/ECT).
  • Passed the near distance (Jaeger Number 1 (J1) test) and color vision examinations
  • Qualified in PCN/ISO/CSWIP UT Level 2.
  • Previous certification in NDE from institute training or NDT Level III.

Behavior Requirements (posisi 4):
  • Team player with good communication and listening skills.
  • Quick learner with strong analytical skills and effective problem-solving abilities.
  • Strong attention to detail to accurately perform inspections, detect defects, and record findings.
  • Ability to quickly adapt to new environments and work with people from varied backgrounds and cultures.
  • Demonstrate a willingness to learn and stay updated on new techniques, technologies, and industry standards.
  • Willingness to be placed in Batam.

Send your resume to:


Alamat Email Perusahaan:
Email: recruitment@cladtek.com
(Please put the position applied as e-mail subject)

CATATAN BUAT TEMAN-TEMAN

  1. Info Loker yang terbit di website Kerjabatam.com diambil dari berbagai sumber media LOKER yang ada seperti Linkedin, Facebook, Instagram, Koran dan media-media lainnya.
  2. Seminimal mungkin Admin memposting LOKER yang bersifat PENIPUAN karena sebelum dipublish sudah difilter untuk menghidari oknum-oknum yang tidak bertanggung jawab dan hanya ingin memanfaatkan kesempatan yang dapat merugikan Teman-teman semua.
  3. Hal yang Terpenting adalah Bijak dalam melihat Loker yang ada di website Kerjabatam.com, seperti Loker yang sudah Kadaluwarsa (Lewat waktu / Sudah Tutup). Karenanya Loker yang sudah lewat dari 7 Hari atau maksimal 2 Minggu dari tanggal Posting untuk diabaikan karena kemungkinan besar Loker sudah ditutup / kadaluwarsa oleh perusahaan. Kecuali dalam postingan terdapat tanggal deadline/batas waktu pengiriman yang Admin tulis dan teman-teman bisa merujuk itu.
  4. Jika ada pertanyaan, teman-teman dapat bergabung di Group Telegram Lowongan Kerja 2025 dengan cara klik link berikut:
    https://t.me/dwiloker